Toll Free: 800-891-3100 Local: 503-685-5015 Fax: 503-682-9680 Email: [email protected]
- Discontinued
2515
BEAR CLAW™ SHARP TIP WITH TRIPLE POINT™ SERRATIONS
Designed by Russ Kommer in Fargo, North Dakota
Russ Kommer is a bright young custom knifemaker who was based in Anchorage, Alaska, for many years. Conditions there are rugged, either from the climate or the work folks are doing. He thought a knife that was easy to grip and hard to lose would be a big hit, and since he made the first Bear Claw™, he hasn't been able to meet the demand. His original concept was a self-defense knife for women that would be lightweight, easy to access and control. But it seems that every parachutist, bush pilot and commercial fisherman who sees one, wants one.
- Triple Point™ Serrations
- Molded Handle w/Palm Swell for Grip
- Positive Locking System Secures Knife in Sheath
Out of stock
Specifications
Blade Length | 2.38" (60.33 mm) |
---|---|
Blade Edge | Triple Point Serrations™ |
Blade Steel | AUS 4 |
Blade Finish | Bead Blast |
Blade Thickness | 0.13" (3.30 mm) |
Overall Length | 5.75" (146.05 mm) |
Weight | 3.20 oz. (90.72 g) |
Handle | Glass Reinforced Nylon |
Style | Fixed Blade Knife w/Sheath |
Sheath Material | Thermoplastic |
Sheath Weight | 1.10 oz. (31.18g) |
Russ Kommer is a bright young custom knifemaker who was based in Anchorage, Alaska, for many years. Conditions there are rugged, either from the climate or the work folks are doing. He thought a knife that was easy to grip and hard to lose would be a big hit, and since he made the first Bear Claw™, he hasn't been able to meet the demand. His original concept was a self-defense knife for women that would be lightweight, easy to access and control. But it seems that every parachutist, bush pilot and commercial fisherman who sees one, wants one.
As a result, Russ and CRKT® teamed up to make the production Bear Claw, a cutting machine that, thanks to the generous size finger hole, acts just like an extension of your hand. It is the perfect emergency cutting tool for anyone who needs to quickly cut rope, webbing or netting, especially if their life is going to depend on it.
The Bear Claw 2515 features a blade that is full Triple-Point™ Serrated with a pointed tip. Blades are full-tang, taper-ground AUS 4 stainless steel with a fine bead-blast finish. Friction grooves are placed on the blade spine, choil and near the tip for maximum blade control and safety. The contoured glass filled nylon handle fills the hand neatly. The Bear Claw weighs in at a lightweight but stout 3.2 oz. (The tear-drop-tip model is a bit heavier.)
We developed one of our CRKT® trademark high-tech sheaths for the Bear Claw that's only 1.1 oz. of tough, durable, injection-molded glass filled nylon. It allows efficient quick release of the knife—just thumb push against the sheath to release smoothly and quietly—or give a sharp pull.
It features molded-in threaded fittings for attachment of the wide black stainless steel pocket clip at either end, using the Torx® tool and screws provided. The sheath also has a total of seven lanyard holes and belting slots to permit a variety of carry positions, and a lanyard is provided.
As a result, Russ and CRKT® teamed up to make the production Bear Claw, a cutting machine that, thanks to the generous size finger hole, acts just like an extension of your hand. It is the perfect emergency cutting tool for anyone who needs to quickly cut rope, webbing or netting, especially if their life is going to depend on it.
The Bear Claw 2515 features a blade that is full Triple-Point™ Serrated with a pointed tip. Blades are full-tang, taper-ground AUS 4 stainless steel with a fine bead-blast finish. Friction grooves are placed on the blade spine, choil and near the tip for maximum blade control and safety. The contoured glass filled nylon handle fills the hand neatly. The Bear Claw weighs in at a lightweight but stout 3.2 oz. (The tear-drop-tip model is a bit heavier.)
We developed one of our CRKT® trademark high-tech sheaths for the Bear Claw that's only 1.1 oz. of tough, durable, injection-molded glass filled nylon. It allows efficient quick release of the knife—just thumb push against the sheath to release smoothly and quietly—or give a sharp pull.
It features molded-in threaded fittings for attachment of the wide black stainless steel pocket clip at either end, using the Torx® tool and screws provided. The sheath also has a total of seven lanyard holes and belting slots to permit a variety of carry positions, and a lanyard is provided.
Fargo, North Dakota
To say Russ is an outdoorsman is a bit of an understatement. A professional fishing and hunting guide, he started making knives when one of his clients brought him a custom knife and dressed an entire moose—without sharpening it. Since then he’s made it his duty to build the kind of tools only he would use. It just so happens his Bear Claw’s™, and Hoist’N Lok®, are the kinds other hunters use as well.
Write Your Own Review